Performance Evaluation of Delonix regia Sawdust as Cement Retarder in Oil and Gas Well

Sawdust, a byproduct of wood exploitation and processing, poses environmental pollution risks if not managed appropriately. Its substantial carbon footprint can lead to pollution, habitat disruption, and fire hazards. However, repurposing sawdust as a chemical additive in cement slurry within the oil and gas industry offers an environmentally friendly solution. This practice aligns with sustainability goals, enhances cement slurry properties, promotes wellbore stability, and replaces more hazardous additives, thereby reducing environmental impact. This study is aimed at the production of a retarder (sodium lignin) from sawdust waste obtained from the Delonix regia species, and examining its effect on the thickening time/consistency, compressive strength, and rheological properties on the slurry of a Class G cement At a Bottom Hole Circulating Temperature (BHCT) of 90°C, thickening time tests conducted on the slurry samples revealed that as the concentration of the locally synthesized retarder increases, the thickening time of the concrete also increases, with minimal effect on compressive strength. The optimal thickening time result of 6 hours and 13 minutes was achieved with 0.5% Sodium Lignin (Retarder from Delonix regia sawdust) replacing a portion of the cement. At a bottomhole static temperature (BHST) of 100°C, increasing the concentration of the formulated sample led to higher Plastic Viscosities (PV) and yield points in the slurries. The findings indicate that slurries formulated with sodium lignin maintain viscosities within recommended values, making them suitable for pumping.